New Wall Decoration Profile in 2024: Carbon Crystal Board

Wall decoration materials are one of the factors that designers need to consider when planning design schemes. We all know that there are many types of indoor wall decoration materials. Without rich professional knowledge, it is difficult to be handy when doing interior design.

Commonly used wall decoration materials include wallpaper, wall cloth, PVC wall panels, solid wood wall panels, bamboo fiber wall panels, metal wall panels, diatom mud, paint, etc. These commonly used decorative materials have their characteristics and are widely used in life.

However, this article will introduce a newly popular wall decoration material to everyone, which is carbon crystal board.

What is the Carbon Crystal Board?

Carbon crystal board, also known as bamboo charcoal co-extruded board and bamboo charcoal wallboard, is a wood-plastic profile made by a high-temperature extrusion process. Its main materials are bamboo charcoal powder, calcium carbonate, PVC, and other additives.

This extruded board has hard co-extruded layers on both sides, with excellent hardness and good waterproofness.

The material structure of carbon crystal board

This carbon crystal board has six layers, each with a specific function:

1. The first layer of transparent protective film plays a role in anti-fouling and anti-ultraviolet protection, protecting the surface from damage.

2. The second layer of the wear-resistant layer enhances the surface's scratch resistance.

3. The third layer of the decorative layer provides rich visual effects, such as wood grain or marble.

4. The fourth layer of the SPC crystal layer and the sixth layer of the crystal layer improve the hardness and stability of the board.

5. The fifth layer of the substrate layer provides core support for the wallboard.

Compared with traditional wallboards, carbon crystal boards have stronger wear resistance, water resistance, and stability, and the overall structure is more solid and durable.

Features of Carbon Crystal Board

The carbon crystal panel is a functional panel that is comprehensively upgraded based on an ordinary wood veneer panel. In addition to being more environmentally friendly than the original wood veneer panel, it also has higher wear resistance, better impact resistance, and more advanced decorative performance.

1. Rich surface colors and stronger decorative effect

Carbon crystal wall panels are produced using double-sided public extrusion technology. The base material is bonded to the surface of wood grain, cloth grain, diatom mud grain, marble grain, metal grain, and leather grain through PUR hot melt adhesive technology. The appearance is diverse and can meet various home and commercial uses.

2. Modular installation

Compared with traditional wood veneer wall panels, the customization cycle of carbon crystal panels is shorter, generally about 3-7 days, with a panel structure and modular installation, which has the advantages of fast construction and convenient installation.

3. Anti-fouling, wear-resistant, moisture-proof, flame-retardant

Carbon crystal plate has excellent hardness and wear resistance, is not easy to scratch or wear, has a smooth surface, and is not easy to absorb dirt.

In addition, it has excellent waterproof performance, is easy to clean and maintain, and can maintain its beauty for a long time.

4. Strong plasticity

It can be customized into various peculiar shapes and appearances. Its height and width can be cut and adjusted at will, and it can also be slotted and bent according to the needs of the project. For example, corner edges, column decoration, etc.

Common specifications of carbon crystal boards

1. Various heights can be customized. Such as 2.6m, 2.8m, 3m, 3.2m. Special heights can also be customized.

2. Thickness usually has three options. Such as 5mm thickness, 8mm thickness, 9mm thickness.

3. The width of the wall panel is usually 920mm wide and 1220mm wide.

Construction technology of carbon crystal board

Since the carbon crystal panel adopts a modular installation method, its installation process is relatively simple, but its main process is reflected in the splicing, edge finishing, and corner processing between panels.

1. Splicing methods: "土" shaped splicing, mother-and-child groove splicing, metal profile splicing.

2. Internal and external corner trimming: There are three ways to trim the internal and external corners of carbon crystal plates, namely, trimming with profiles, arc bending, and right-angle bending.

Installation of carbon crystal wall boards

1. Level the wall

First, level the wall. Use wood boards or wooden strips as a base layer to level the wall. Be careful not to make the distance between the wooden strips too large.

2. Install the carbon crystal board

Apply structural glue evenly on the back of the carbon crystal board. The glue application method is generally applied along the horizontal and vertical lines around the board, with a thickness of about 1 cm.

3. Wall surface treatment

During installation, use a level gauge to mark and ensure the flatness of the wall panels. After installation, use a rubber hammer to evenly tap the surface of the carbon crystal panel to make it close to the wall.

4. Wall panel splicing

When splicing wall panels, use metal decorative strips for connection. Pre-embed the metal decorative line on one side of the wall panel, then fixed it with straight nails, and then installed the second wall panel in turn.

If the carbon crystal board has been opened with mother-and-child grooves, it can be spliced directly without the need to use metal decorative profiles for trimming.

Application scenarios of carbon crystal boards

1. Residential environment

2. Commercial environment

Carbon crystal plate price

The price of carbon crystal panels is usually between US$4.2 and US$21.5, but its price may vary depending on factors such as quality, brand, craftsmanship, and size.

If you are interested in these new interior wall panels, please click the consultation button and leave your contact information. Our professional sales team will contact you as soon as possible to provide you with more information.

Carbon Crystal Panel Selection Guide

When you are confused about how to choose a carbon crystal board, you can make a judgment from the following aspects:

1. Observe the appearance

The surface of the high-quality carbon crystal plate is smooth, without scratches, bubbles, cracks, uniform color, and no obvious color difference.

2. Surface hardness test

High-quality carbon crystal plates have high hardness, are not easy to be scratched or deformed, and have good wear and corrosion resistance.

3. High strength

Carbon crystal boards are lightweight and resistant to stretching, compression, and bending.

4. Observe the density

High-quality carbon wafers have uniform density and no obvious holes or bubbles.

5. Production process

Before confirming the order, take samples to check the quality. If necessary, contact the manufacturer for on-site inspection to observe the control of parameters such as wall panel temperature and pressure during the production process, as well as the quality of the final batch of finished products.

6. Quality Certification

Source wall panel manufacturers have complete quality certifications, such as ISO9001, ISO014001, and CE certification.

Conclusion

The above article introduces in detail the characteristics, material structure, material features, common specifications, and installation methods of this carbon crystal board. We hope that this information can provide some help to everyone. If you want to know more about interior wall panel decoration materials, please feel free to contact us!