The use of carbon crystal wall panels seems to be gaining a lot of momentum across the globe. Carbon crystal wall panels have unique properties over traditional wall panels, which you will learn more about in this article.
So, read this blog post before deciding whether Carbon Crystal siding is perfect for your interior application.
Carbon crystal wall panel, also known as bamboo charcoal co-extruded veneer and bamboo carbon board, is a functional board that is fully upgraded based on traditional wood veneer.
Made with high-temperature extrusion technology, it has higher wear resistance, better impact resistance, and more advanced decorative performance than traditional wallboard.
The carbon crystal wall panel is a composite profile, which contains bamboo charcoal powder, calcium powder, PVC, additives, etc.
The upper and lower surfaces of this extruded board are both hard co-extruded layers, which are harder than ordinary wallboards.
The carbon crystal wall panel has a unique material structure to ensure better wear resistance and impact resistance. Its material structure is as follows:
The first layer is a protective layer, usually a transparent PVC material, which provides protection.
The second layer is a surface film, using a special water-based PVC film, PP anti-scratch film, or PET-G high-gloss film, providing rich colors and realistic textures.
The third and seventh layers are light-cured layers, which are used to make the carbon crystal board fit better with the film.
The fourth and sixth layers are PP co-extruded surface layers, which are used to enhance the stability and durability of the carbon crystal board.
The fifth layer is a carbon crystal layer, which is mainly made of bamboo charcoal powder, resin, and polymer materials pressed at high temperature, and has a unique honeycomb hexagonal molecular structure.
There are many specifications for carbon crystal wall panels.
Length: usually 2440mm, 2600mm, 2800mm, 3000mm, 3200mm, 3500mm, etc.
Width: usually 1220mm.
Thickness: usually 5mm, 8mm, 9mm.
The price of carbon crystal wall panels is affected by many factors, including specifications, surface coating materials, and processes.
Although you may not notice it often, I believe you have come into contact with countless carbon crystal wall panels in your daily life. This wall decoration material with extraordinary performance will attract your attention. But do you know its unique function?
Carbon crystal wall panels use environmentally friendly materials in the production process to reduce the release of harmful substances, meeting our needs for environmental protection and health.
The upper and lower surfaces of the profile are co-extruded layers with high surface hardness, which is not easy to scratch or wear and can maintain long-term beauty.
It has good impact resistance and can withstand certain external forces, increasing the safety of use.
A wide range of colors can be customized to meet the needs of different styles, suitable for home and commercial spaces.
With strong anti-fouling performance, the surface does not easily absorb dust and dirt, and it is easy to clean and maintain later.
Can be slotted and bent to achieve various unique shapes.
Moreover, the customization cycle is short, the installation is easy, and the cost performance is high.
There are many reasons why carbon crystal wall panels have become the mainstream material in today's decoration industry. Here are some of its advantages:
Its surface can be customized in a variety of colors, providing rich color and realistic texture options.
Carbon crystal wall panels can be customized quickly. Including size, surface treatment, splicing method, hole type, etc.
It has strong anti-fouling, wear-resistant, and scratch-resistant characteristics.
And the fire protection level reaches B1.
To ensure that the carbon crystal wall panels have a more beautiful decorative effect, it is necessary to use metal decorative strips for matching decoration or to bend the original base material.
Carbon crystal wall panels are usually spliced with a letter groove design or connected with metal parts to make the splicing more coherent.
Usually, arc bending or right-angle bending is used to process internal and external corners.
In addition, metal external corner trimming strips and internal corner trimming strips can also be used for connection and transition.
Carbon crystal wall panel has a similar installation method to other wall panels. The specific construction process is as follows:
Clean the wall and use wooden keels to level the wall, making sure the spacing between the wooden strips is not too large.
Apply structural glue evenly on the back of the wall panels, with a thickness of about 10 cm.
The glue can be applied horizontally and vertically around the wall panels.
Before installing the carbon crystal wall panels on the wall, use a level gauge to mark the installation position to ensure flatness.
Paste the wall panels along the marking lines and use a rubber hammer to evenly tap the carbon crystal wall panels to make them close to the wall.
After installing the first carbon crystal wall panel, pre-embed metal wires on the edge of the panel fix them with straight nails, and then install the second wall panel.
If the carbon crystal panel adopts a mother-and-child groove design, it can be directly spliced without the need for metal strips for connection.
Carbon crystal wall panels are widely used in interior decoration due to their excellent environmental performance, fire resistance, decorative properties, and ease of installation. The following is a professional description based on specific application scenarios:
Carbon crystal wall panels have wood grain, marble grain, or metal texture, and can be used as artistic wall decoration in the living room.
Light-colored carbon crystal wall panels are more suitable for bedrooms that require a quiet atmosphere. Their thick core material can effectively reduce the interference of external noise and provide a quiet sleeping environment for the bedroom.
Its surface is smooth and does not absorb water, making it suitable for use in kitchen spaces.
In addition, the smooth surface does not easily absorb oil stains and can be cleaned by wiping with a towel dipped in mild water.
The board is resistant to acid and alkali environments and can still maintain excellent performance in the high temperature and high humidity environment of the bathroom.
The 1220mm width can effectively reduce the traces of splicing, and its modular installation method is also suitable for the needs of fast installation in ceiling decoration.
Carbon crystal wall panels are a new type of interior wall decoration profile, providing more possibilities for interior space decoration.
Whether you want to apply them to the living room background wall or ceiling, you know that carbon crystal wall panels are trustworthy.
CREATEKING is a manufacturer of carbon crystal wall panels, bamboo fiber wall panels, and wood plastic grilles. We can provide you with low-priced and high-quality products.
If you are looking for carbon crystal wall panels, CREATEKING is your trusted partner in China - contact us now.
