PVC wall panels are usually made by adding stabilizers, lubricants, and fillers to PVC, mixing them evenly, and then extruding them into profiles of various thicknesses using an extruder.
In this article, we will introduce the application, installation, and maintenance process of PVC wall panels.
Because PVC wall panels have excellent physical and chemical properties, they are widely used in many aspects of the construction and decoration industries:
Living room TV background wall decoration
Since PVC wall panels have good processing performance, they can be processed by nailing, sawing, cutting, drilling, etc., and can be designed into various shapes for TV background wall decoration.
The surface can be customized into various colors and textures, so it can be matched with various decorative elements to form a unique and rich wall decoration effect.
PVC wall panels are used for TV background walls, to make them have a more perfect decorative effect. Metal decorative lines can usually be used for decoration. It has both the natural texture of wood grain and the bright texture of metal, plus the lighting effect of LED light strips, making the living room wall more fashionable and warm.
Kitchen wall decoration
PVC wall panels can also be used for kitchen wall decoration. They have excellent flame-retardant properties and can effectively prevent the spread of fire. The fireproof grade is B1, and they will automatically extinguish when leaving the fire source. Therefore, these fireproof PVC wall panels are particularly important for families with elderly and children, or families that pay special attention to indoor fire prevention.
Secondly, PVC wall panels can be customized into various textures through the coating process. Their smooth and flat surface is not easy to absorb stains and is easy to clean. In daily life, you only need to wipe the surface with a wet towel to easily complete the cleaning.
However, it is worth noting that these wall panels should be kept away from strong acid and alkaline detergents as much as possible because these liquids are likely to corrode their surface and damage their appearance.
Bathroom wall decoration
The wall panels installed in the bathroom need to have excellent waterproof performance, and PVC wall panels are the best solution for bathroom wall decoration.
Since the main material of PVC wall panels is plastic, certain calcium carbonate, flame retardants, stabilizers, and paraffin are added during the production process. Therefore, it usually has excellent waterproof and moisture-proof properties.
You may consider that the bathroom environment and its decoration style will be different for each project, so can these PVC wall panels perfectly match different bathroom environments? The answer is yes, this PVC wall panel can be customized with specific colors and textures according to your project needs.
Interior ceiling decoration
Interior design is a never-ending job. You can use these high-quality PVC wall panels to decorate your ceiling according to the plan of professional designers.
When installing PVC wall panels on the ceiling, you can use its rich texture and 3D groove design to create a rich sense of layering for the ceiling space.
Usually, these PVC wall panels are installed with adhesives, but if installed on the ceiling, it is recommended that you use nails for further fixing to make it more secure.
Office background wall decoration
PVC wall panels are an affordable option for projects with limited budgets.
It can be designed in different shapes and sizes according to your ideas to meet your personalized needs.
When choosing PVC wall panels as office background wall decoration, you may need to consider its color, texture, and coordination with the overall style of the office.
Generally speaking, light-colored wall panels can create a bright and spacious visual experience. Dark-colored wall panels can create a stable and professional atmosphere.
In addition, since PVC wall panels are easy to install, installation and maintenance time can be shortened.
Bedroom wall decoration
PVC wall panels are also ideal bedroom background wall decoration materials, with waterproof, moisture-proof, flame-retardant, sound-proof, heat-insulating, and other characteristics.
In addition, compared with solid wood wall panels, PVC wall panels are easier to maintain and can complement a variety of bedroom decoration elements to create a quiet and soothing rest space.
Other business areas
Low maintenance cost is a big advantage of PVC wall panels. In some busy commercial spaces, installing this easy-to-clean wall panel is undoubtedly a wise investment.
For example, you can use them to decorate public places such as shopping malls, bars, exhibition halls, etc., making these areas more fashionable.
Things to consider when buying PVC wall panels
Before buying PVC wall panels, please consider the following things to help you make an informed decision:
Choose high-quality materials
When buying PVC wall panels, you should choose high-quality materials with moderate thickness, uniform texture, and no pores. Too thin thickness will affect the sturdiness of the wall panels, while too thick will increase the cost. High-quality PVC panels should be non-toxic and odorless, harmless to the human body, and have certain fire resistance.
Accurate measurement and planning
Before installation, you need to carefully measure the size and shape of the installation space to ensure that the position and size of the wall panels meet the requirements.
Pay special attention to measuring the positions of doors, windows, etc. to avoid affecting the normal use of the space after installation. At the same time, you should design the height and shape of the wall panels in advance according to your needs.
Ensure a secure installation
When installing PVC wall panels, ensure that they are secure and stable.
You can use special PVC panel fixings or tools such as screws to fix them and follow the instructions or the guidance of professionals. During installation, avoid using adhesives that are easy to fall off, such as glass glue, structural glue, and nail-free glue.
Keep it clean
Although PVC wall panels have certain waterproof properties, they still need to be kept clean.
In daily life, stains and mold on the surface of the wall panels should be cleaned in time to avoid damage caused by stains remaining on the wall panels for a long time.
When cleaning, use a neutral detergent and a soft cloth to wipe, and avoid using detergents containing bleaching ingredients.
Regular maintenance
To ensure the beauty and service life of PVC wall panels, they need regular maintenance.
After long-term use, scratches and discoloration may appear on the surface. At this time, special PVC board maintenance agents can be used for repair and maintenance. If the wall panels are damaged or aged, they should be replaced or repaired in time.
Installation Process
1. Flat wall
Depending on the installation environment, there are two ways to install PVC wall panels: flat wall and uneven wall.
For flat walls, there is no need to use a bracket as a foundation, and glue is used to fix the installation. Use clips and screws to splice different walls, usually two clips per meter.
Make sure the wall is flat
If the wall is flat, there is no need to prime it with brackets. This can be determined by checking the flatness of the wall with a level ruler. If the wall is uneven, you can make appropriate repairs first.
Clean the wall
Before installation, make sure the wall is free of dust, oil, or other substances that may affect the adhesion of the glue. You can wipe the wall with a detergent and a clean cloth.
Choose glue
You can choose the right type of glue according to your actual needs. Nail-free glue is suitable for quick installation and provides sufficient fixing force, structural glue performs well under high strength requirements, and glass glue is suitable for humid environments or areas that require additional waterproofing.
Apply glue
Apply glue evenly to the back of the PVC wallboard. When applying glue, pay attention to even distribution to avoid gaps. It is usually recommended to apply glue in a "Z" shape or snake pattern to ensure that the wallboard can fit the wall firmly.
Paste the wallboard
Press the glued PVC wallboard quickly onto the wall. Starting from one end of the wallboard, press it hard against the wall to ensure that there are no bubbles or gaps. You can use a pressure roller or your palm to apply even pressure to ensure that the wallboard fits tightly against the wall.
Fix the wallboard
Maintain a certain amount of pressure to fix the wallboard to the wall until the glue is fully cured. If necessary, use temporary supports to fix the wallboard in place until the glue cures.
Use snap-on wall panels
Some PVC wall panels use a snap-on design, which allows adjacent wall panels to be tightly spliced together. When installing, just align the snap-on parts of the two wall panels and gently press or tap to make the two wall panels seamlessly connected.
Use screws to fix the wall panels
In some cases, additional fixing measures may be required. Screws can be used to strengthen the connection between wall panels. According to the standard configuration, it is recommended to use two screws per meter of wall panel. Screws are usually installed at the joints of wall panels and should be hidden to avoid affecting the appearance.
Check the splicing effect
After each wall panel is installed, check whether the joints are tight and flat and whether there is any misalignment, looseness, or gaps. If the splicing effect is different, it can be adjusted appropriately.
Edge Treatment
When all the wall panels are installed, you can use PVC edge strips or other decorative strips to finish the edges and corners. This will improve the overall appearance and protect the edges of the wall panels.
Cleaning
Clean the installation area and remove excess glue and waste generated during the installation process. Use a soft cloth to wipe the surface of the wall panels to remove fingerprints or other stains.
Installation precautions
Construction temperature
During installation, ensure that the ambient temperature is appropriate to avoid excessively high or low temperatures that may affect the performance of the glue.
Glue curing time
Depending on the type of glue used, ensure that the glue is fully cured before proceeding with other decorations or moving wall panels.
2. Uneven wall
For uneven walls, you will need to use wooden brackets or metal brackets to level them first, and then install the wall panels. When installing the wall panels, splice them in sequence and use a nail gun to drive nails into the slots of the wall panels to fix them.
Check the flatness of the wall
Use a level ruler or laser level to check the flatness of the wall and determine the position that needs to be leveled with the bracket.
Prepare materials
Prepare wooden squares, adjustable brackets or wood boards, and other installation tools and materials such as air nail guns, screws, glue, etc. according to actual needs.
Use wooden strips to level the wall
Choose suitable wooden strips (common specifications are 40mm x 20mm or 40mm x 30mm), and make sure the strips are straight and dry.
Fix the strips horizontally and vertically on the wall, and the spacing between the strips is generally between 40 cm and 60 cm. Use screws or expansion bolts to firmly fix the strips on the wall. If the wall is uneven, you can use shims to adjust the height of the strips to ensure it is flat.
After the strips are fixed, use a level to check their flatness again to ensure that the entire primer frame is straight.
Use adjustable keels to level the wall
Adjustable keels are usually made of metal. They are suitable for walls that require high flatness.
First, fix the keel brackets on the wall. These brackets can control the height by adjusting the screws, thereby adjusting the flatness of the entire keel.
Install the keel on the brackets and gradually adjust the screws of the brackets to ensure that the keel system is flat as a whole. During the installation process, it is also necessary to use a level meter to check several times.
Use wooden boards to level the wall
Choose wooden boards of appropriate thickness (usually 12mm or 15mm thick) as the wall primer material.
According to the wall size, cut the wooden boards into sizes that fit the size and shape of the wall.
Fix the wooden boards tightly to the wall and fix them with screws or glue. Pay special attention to the treatment of edges and joints to ensure that the wooden boards are flat and seamless after installation.
Measuring and Cutting
Measure and cut the PVC wall panels according to the actual dimensions of the wall. Make sure the dimensions of the wall panels match the wall, paying special attention to the locations of openings such as doors and windows.
Install the wall panels one by one
Start at one end of the wall and install the PVC wall panels one by one. Wall panels can usually be connected using a slot system.
Align the slot of the first PVC wall panel with the primer material and insert it into the slot.
At the slot position of each wall panel, use an air nail gun to nail the wall panel at a 45-degree angle. The air nails should be driven into the primer material to ensure that the wall panel is firmly installed.
Joint treatment
When all wall panels are installed, the joints can be covered with PVC decorative strips or other decorative materials to ensure that the joints are beautiful and without obvious marks.
Corner treatment
Use special decorative strips to handle corners, doors, and windows to ensure the overall visual effect is coordinated and unified.
Cleaning and inspection
Clean up the debris, debris, and excess glue generated during the installation process. Finally, check the flatness and installation firmness of the entire wall to ensure that the wall panels are not loose or warped.
Installation precautions
Correct operation of construction tools
When using an air nail gun, ensure that the angle and position of the air nails are correct to avoid damaging the wallboard or primer material.
Pay attention to the installation direction of the wallboard
When installing the wallboard, pay attention to the uniformity of the overall direction, especially for PVC wallboards with textures or patterns, to ensure that the texture direction of all panels is consistent.
Ambient temperature and humidity
Ensure that the construction is carried out under appropriate temperature and humidity conditions to avoid deformation caused by thermal expansion and contraction of the material.
Maintenance Tips for PVC Wall Panels
Maintenance tips for PVC wall panels mainly include proper cleaning, regular maintenance, sun protection, fire protection, scratch resistance, stain resistance, and dust resistance.
Proper cleaning and maintenance
Use mild detergent and soft cloth for cleaning, and avoid using detergents containing acidic or alkaline ingredients to avoid damaging the PVC wall panels.
In addition, you can wipe the surface with clean water regularly to remove dust and stains or use a special PVC wall panel maintenance agent to increase the gloss and prevent the surface from yellowing and aging.
Sun protection
If PVC wall panels are exposed to direct sunlight for a long time, they will age prematurely and affect their service life. In a sunny environment, it is best to draw the curtains to avoid exposing the wall panels to direct sunlight for a long time.
Fireproof
PVC wall panels should be kept at a proper distance from stoves, heaters, etc. Continuous baking will accelerate the aging of the wall panel surface coating.
Scratch-proof
Avoid using sharp objects to scratch the wall panel surface to protect its beauty.
Stain-proof
Remove stains in time. Ordinary stains can be wiped with a rag dipped in warm water, oil stains can be wiped with a rag dipped in soapy water, laundry detergent or detergent, and beverage, medicine, or paint stains can be wiped with a soft cloth dipped in white vinegar.
Dust-proof
Regularly use a feather duster to remove dust adsorbed on the wall.
As a new type of interior wall decoration material, PVC wall panels are favored by people because of their environmentally friendly and durable materials. Due to its environmentally friendly and recyclable characteristics, it will not have much impact on our environment.
Due to its easy installation, maintenance, and cleaning characteristics, it is very popular in today's building materials market. PVC wall panels are gradually becoming an ideal substitute for traditional wooden wall panels.
With the development of the times and the advancement of technology, PVC wall panels will become more important in the future construction industry, including the iteration of its materials, the advancement of production technology, and the richness of finishes. In short, if you have other ideas about PVC wall panels, please feel free to contact us, our team of experts will provide you with more professional services!
