You can understand that a wall decorated with high-quality indoor WPC wall panels is a beautiful painting. It provides a strong visual appeal and a durable solution for your living room, bedroom, and ceiling space. Although we all know that indoor WPC wall panels are known for their excellent durability and low maintenance cost advantages, they are widely used in many residential and commercial spaces. However, proper maintenance and care are essential to ensure that they can provide long-term visual appeal and optimal decorative status. This latest comprehensive guide delves into properly maintaining and caring for your indoor WPC wall panels, addressing everything from daily cleaning to dealing with surface scratches, damage, and regular inspections.
Indoor WPC wall panels are made of wood fiber materials and thermoplastics such as polyethylene, polypropylene, or polyvinyl chloride. This kind of wall panel has the dual advantages of the natural appearance of wood and the durability of plastic, providing a highly decorative and durable solution for indoor living room TV background walls, bedroom walls, indoor corridors, ceilings, and some high-end furniture surface decoration.
Unlike traditional solid wood wall panels, they have excellent waterproof, moisture-proof, insect-proof, mildew-proof, and corrosion-resistant properties. They are also light, environmentally friendly, and easy to install.
The cleaning and maintenance of indoor WPC wall panels involve many aspects of the project, including the preparation of cleaning tools, daily dust removal, cleaning of stains and spills, methods to prevent impact, and regular inspections to deal with surface scratches and damage.
Regular removal of dust and dirt is necessary to maintain the beauty and functional quality of indoor wood-plastic wall panels. If dust accumulates on their surface for a long time, they will become dull and lose their luster. Over time, they are easily damaged, affecting their service life.
Before cleaning, you need to prepare the following tools in advance:
1.1 Soft brush or towel
A soft brush can easily remove dust from the surface of the wallboard, while a towel can help you perform further deep cleaning.
1.2 Sponge
Soak the sponge in warm water and use it to clean the wall panels. The sponge surface is soft and does not damage the wall surface. It is suitable for cleaning small stains on the wood-plastic wall panels, especially those in corners or grooves.
1.3 Warm Water
Use warm water to dilute mild cleaning solutions.
1.4 Mild detergent
Use a mild detergent and warm water in a certain proportion to prepare a cleaning solution to remove stains and oil stains on the wall.
Choose a mild detergent and avoid using strong acid and alkali detergents, otherwise, it may damage the surface of the wood-plastic wallboard.
1.5 Bucket
Used to hold the prepared cleaning solution. Using a bucket can control the amount of water used during cleaning and prevent excessive water from seeping into the joints of the wood-plastic wall panels.
1.6 Microfiber cloth
Microfiber cloth is used to wipe and dry the surface of the wallboard. Microfiber cloth has strong water absorption and can effectively clean and quickly dry water stains to prevent water droplets from remaining on the surface of the wallboard and affecting the appearance.
1.7 Cleaning brush (detail brush)
The cleaning brush is used to clean small gaps, corners, and hard-to-reach areas of the wall panels. The cleaning brush can help you remove dust and stains from these areas to ensure all-round cleaning.
1.8 Clean soft cloth
When cleaning, use a clean soft cloth to wipe the surface of the wallboard.
After using a wet rag or detergent, use a clean soft cloth to help wipe away any remaining water stains.
1.9 Rubber gloves
Rubber gloves can protect your hands from detergent or water, especially when the detergent may contain some chemical ingredients.
Rubber gloves can ensure the hygiene and safety of your hands during the cleaning process.
1.10 Spray bottle
If the stains on the wallboard are stubborn, you can put the detergent solution into a spray bottle and spray it evenly on the stains. This will allow you to more accurately control the amount of detergent used.
1.11 Vacuum cleaner
A vacuum cleaner can help quickly remove large areas of dust and small particles from the wallboard, especially before cleaning.
1.12 Masks
Masks help protect your nasal cavity from inhaling dust, debris, and the odor of cleaning agents during cleaning.
If there are construction projects around your home, there is a good chance that your indoor space is covered with a lot of dust. Then you can use a vacuum cleaner to remove most of the dust and debris from the wall surface.
Then, you can use a soft brush or microfiber cloth to dust the WPC wall panels for a second time. And you can use a detail brush to fine-tune the gaps, corners, and hard-to-reach areas of the wall panels.
Then, use a soft cloth or sponge dipped in the formulated cleaning solution, wring out the excess water, and gently wipe the panel. When the surface of the wall panel is clean, move inwards in the direction of the groove to ensure that the wall surface is completely clean.
Finally, rinse the wall with clean water to remove any residual detergent. And wipe the panel with a clean soft cloth to keep it dry.
Whether it is a residential or commercial space, stains are inevitable on the wall panels. However, we need to take timely measures to prevent stains from causing lasting damage to WPC wall panels.
3.1 Food stains
If there are food stains on the wall panel surface, it is very easy to clean. Just wipe the surface immediately with a damp cloth and mild detergent. If the stain is larger, please rinse it with clean water in time and wipe it dry with a soft towel.
3.2 Ink or marker stains
Using alcohol or acetone can effectively dissolve the solvent components in ink and markers, which helps to remove surface stains.
Pay attention to wiping a small area and avoid excessive use of alcohol. In addition, do not use too much force during the scrubbing process to avoid damaging the wallboard surface.
3.3 Oil stains
Oil stains can be cleaned with mild detergent. First, wet a soft towel with the detergent and wring out the excess water, then wipe the stain, and finally wipe off the remaining water with a clean soft towel.
3.4 Mold
Although wood-plastic wall panels themselves will not breed mold, if they are in a humid environment for a long time, other debris may be absorbed on their surface, causing mold to grow.
To clean mold, you need to prepare a cleaning solution of equal amounts of water and white vinegar. After wetting a soft cloth or sponge with the white vinegar cleaning solution, wring out the water in time, gently wipe the mold area, and rinse thoroughly. Finally, wipe off the water stains with a soft towel to ensure that the wall is restored to a dry state.
Taking protective measures can extend the service life of WPC wall panels. You can use the following methods to fully protect the wall panels from impact damage:
4.1 Avoid placing hard objects near the wall
Place furniture and heavy objects properly, especially avoid placing sharp or sharp-edged objects near the wall.
4.2 Install protective covers on furniture
Install felt or rubber protective covers on the corners of furniture to avoid scratching the WPC wall panels when moving or rearranging furniture.
4.3 Install wall guards
Install wall guards at low points on WPC wall panels, especially in areas prone to impact (such as doorways and corridors).
4.4 Use corner protectors
The corners of wood-plastic wall panels are often more vulnerable to impact, so special corner protectors can be installed at the corners. Such as rubber protection strips or PVC or metal edge strips.
Even if you take great care of these indoor WPC wall panels, scratches and damage may still occur. When it is necessary to deal with scratches or damage on the surface of the wall panels, different repair methods can be used according to different situations.
5.1 Repair of minor scratches
Choose a wood grain repair pen that matches the color of the indoor WPC wallboard and apply it evenly along the scratch until the scratch is filled.
In addition, you can also use a repair wax that is close to the color of the wallboard, apply it to the scratch, and gently wipe the repair area with a soft cloth to restore the surface gloss.
5.2 Repair of Deep Scratches
Use the filler or WPC filler paste specially made for WPC wallboard to fill the scratches or damaged areas. After the filler is completely dry, use sandpaper to gently polish the filled area to make it flat and flush with the original wallboard surface.
In addition, for larger scratches or holes, high-quality WPC filler glue can be used to fill them. Apply the filler glue to the damaged area, wait for it to dry, polish it flat with sandpaper, and then cover it with paint.
5.3 Surface Damage Repair
If the surface coating of the wallboard is damaged, you may consider repainting the surface with a paint of the same color to restore a uniform appearance.
5.4 Repair of severe damage
If the wallboard surface is severely scratched or damaged so severely that it cannot be repaired with repair paste, repair glue, or touch-up paint, you need to consider replacing the damaged part.
For the removal and replacement of the wallboard, please consult a professional wallboard manufacturer for professional assistance.
Regular inspection of your WPC wall panel is an important step to keep it in good condition and extend its life. Here are some aspects of the interior wall panel that need to be inspected:
6.1 Inspection of wallboard surface
Inspect the wallboard surface visually and tactilely for cracks, scratches, dents, discoloration, or other obvious damage.
If small scratches or cracks are found, they can be repaired with filler or paint. If extensive damage is found, partial replacement may be required.
6.2 Check if the wall connectors are loose
Check if the connection between the WPC wall panels is firm. If loose, tighten the screws again or replace the connectors.
6.3 Moisture-proof inspection
Check the bottom and joints of the WPC wall panels for moisture penetration or moisture. If mold or wall panel deformation is found, it should be handled immediately.
6.4 Cleaning inspection
Observe the surface of the wallboard for dust accumulation or stains, especially in the grooves and edges. Clean the wallboard regularly with a feather duster or a clean wet rag to remove dust adsorbed on the surface.
6.5 Check the stability of the wall panel structure
Regularly check the flatness of the indoor wood-plastic wall panels with a level or ruler to ensure that there is no deformation or tilt.
If obvious deformation or tilt is found, the supporting structure needs to be readjusted or reinforced.
6.6 Color consistency check
Check whether the WPC wall panels have uneven colors or faded colors, especially those near the balcony.
Wall panels may fade or the PVC film may fall off when exposed to sunlight for a long time. Check regularly and take countermeasures in time.
Use the right knowledge and practices to maintain your interior WPC siding to preserve its beautiful finish and excellent functionality. You can follow the detailed steps in this guide to regularly clean wall panels, remove stains, and promptly repair defects to ensure they always look their best.
At CREATEKING, we are proud to be the largest and most trusted interior wall panel manufacturer in China. We have an extremely complete series of interior wall panels, including wood plastic wall panels, PVC wall panels, 300mm wall panels, 400mm wall panels, 600mm wall panels, and 1220 large panels. We are committed to providing customers with the highest quality products and excellent customer service. Whether you are applying these high-quality wall panels to residential or commercial spaces, I believe that choosing CREATEKING wall panels will be a wise choice.
Don't wait any longer to transform your home with beautiful, durable CREATEKING siding. Contact us today to learn more about our products and let us help you turn your vision into reality.